Nylon swivel wheel with brake 200 mm - reinforced - ball bearing - 800 kg
Shock and impact resistant
The reinforced swivel fork with polyamide wheel is suitable for intensive use. The heavy-duty swivel castors with forward brake are ideal for heavily loaded transport carts that can withstand shock loads and side impacts. The swivel fork contains a double hardened ball race and is firmly riveted at several points, preventing play. The caster wheel has a short protruding brake that blocks both the wheel and the swivel without play.
Forward brake
The yellow galvanized brake is located on the other side of the swivel fork, unlike traditional casters. When the cart is pushed forward, the brake moves forward with it. This means there is no protruding brake on the push side of the cart, reducing the risk of injury to the shin. The brake is adjustable and locks the wheel and the fork simultaneously without play.
Wear-resistant and long lifespan
The polyamide wheel performs well on flat concrete floors with little dirt. Polyurethane is more suitable for dirty or rough surfaces. Polyamide is hard and has low rolling resistance on clean, flat floors. More vibrations and noise can occur on rough surfaces. Polyamide is very wear- and impact-resistant. The reinforced 8 mm thick swivel ring is well lubricated and can be re-lubricated via the grease nipple. The thickened swivel ring is almost completely sealed and has a red dust ring as extra protection against dust and dirt.
Low rolling resistance
The hardness and slight convexity of the polyamide wheel ensure little contact surface with the surface, which results in minimal friction. This leads to low rolling resistance and long rolling continuity. The wheels have a precision ball bearing (6204 ZZ) on both sides and are mounted without tension.
Optional: directional lock
The swivel casters with forward brake can be equipped with a directional lock. This can be ordered as an option if there is a need to block the swivel function and change it to one direction, comparable to a fixed caster. The directional lock is mounted under the top plate and can be operated with the foot. When the direction retainer is pressed and the application is moved, the mechanism automatically clamps, regardless of the position of the swivel fork.
- Article number: 458.243
- Wheel diameter: 200 mm
- Fork: Steel, galvanized
- Assembly: Plate mount
- Bolt hole spacing: 105 x 80 - Ø 11 mm
- Building height: 245 mm
- Plate size: 135 x 110 mm
- Temperature: - 20 / + 80 °C
- Bandage: Polyamide (PA6)
- Wheel bearing: Double ball bearing
- Wheel width: 50 mm
- Carrying capacity: 800 kg
- Suitable for: Flat surface
- Soundproof: 1
- Wear-resistant: 5
- Rolling resistance: 5
- Tyre hardness: approx. 75 shore D
- Brake: Locks wheel and swivel simultaneously
- Type of wheel: Swivel castor with brake
- Gaff rash: 55 mm
- Article number: 458.243
- Wheel diameter: 200 mm
- Fork: Steel, galvanized
- Assembly: Plate mount
- Bolt hole spacing: 105 x 80 - Ø 11 mm
- Building height: 245 mm
- Plate size: 135 x 110 mm
- Temperature: - 20 / + 80 °C
- Bandage: Polyamide (PA6)
- Wheel bearing: Double ball bearing
- Wheel width: 50 mm
- Carrying capacity: 800 kg
- Suitable for: Flat surface
- Soundproof: 1
- Wear-resistant: 5
- Rolling resistance: 5
- Tyre hardness: approx. 75 shore D
- Brake: Locks wheel and swivel simultaneously
- Type of wheel: Swivel castor with brake
- Gaff rash: 55 mm